Sunny Science & Technology Development Co., Ltd.
Main products:Hot dip Galvanizing Line,Hot dip Galvalume Line,Continuous Annealing Line,Color Coating Line,Silicon Steel Continuous Annealing Line,Skin Pass Mill,Tension leveler,Air knife,Annealing Furnace,Walk beam
Products
Contact Us
  • Contact Person : Mr. Fang Zhenyan
  • Company Name : Sunny Science & Technology Development Co., Ltd.
  • Tel : 0086-27-59715059
  • Fax : 0086-27-59715060
  • Address : Hubei,Wuhan,8-15, street SBI, optic valley, East-lake High-tech Development District, Wuhan
  • Country/Region : China
  • Zip : 430074

1.5-4.0mm*800-1380mm hot rolled pickling sheet/coil

1.5-4.0mm*800-1380mm hot rolled pickling sheet/coil
Product Detailed
1 raw meterial:carbon steel,alloy steel 2 coil weight:max.25T 3 annual capacity:1,200.000tpy 4 competitive price&high qutity

    HR pickling steel sheet adopts high quatity hot rolled strip as raw material,after removing oxidized scale,edge trimming and skin pass processing,gets intermediate product whose surface quality and property(mainly including cold bending or drawing property)is between HR and CR.

Advantage of HR pickling steel:

1 compared with HR steel,its advantages mainly are:

1)good surface quality,owing to oxidized scale being removed,and also good for welding,oiling and painting.

2)Precise dimensions,owing to skin pass process which improves strip shape and flatness error caused,

3)Improve surface roughness and make it looks more perfect

2 Compared with CR steel,it can reduce the customer's cost under guarentee of good surface quality.

Raw material:

Low carbon steel,carbon structural steel,improved carbon structural steel,low ally steel.

Product spec.:

1 Thickness range:1.5-4.0mm

2 Width range:800-1380mm

3 I.D.:Φ610mm

4 O.D.:max.Φ2000mm

5 Coil weight:max.25t

Product grade,standard and purpose

Standard& gradenational standard(GB)GradeEquivalent standardGradeFunction& purpose
Material typeImplementation of standardsStandard code
Cold forming steelQ/BQB302SPHCJISG 3131SPHCSuitable for manufacture of cold forming parts
SPHDSPHD
SPHESPHE
DD11(St22)EN 10111DD11
DD12(St23)DD11
DD13(St24)DD11
Common structure steelGB/T912-2008Q195JISG 3101SS330Used for building,bridge,vessel,vehicle,etc.
Q215SS330
Q235SS400
St33DIN17100ST33

Dimension,profile,weight and tolerance 

Nominal dimension of strip should accord with

Thickness(mm)Width(mm)Length(mm)Coil I.D.
1.5-4.0800-13802000-2500(orC)Φ610

Thickness tolerance should accord with

Nominal thicknessThickness toleranceTolerance in transverse sectionTolerance in Longitudinal section
>1.5-2.6±0.10≤0.05≤0.05
>2.6-3.0±0.12≤0.05≤0.05
>3.0-4.0-0.17~+0.12≤0.05≤0.05

Tolerance of Flatness:12mm per 1000mm length

Tolerance of Camber:4mm per 2 meter length

Tolerance of width should accord with

 Width tolerance
Width range>2.0-2.8>2.8-3.5
Edge trimming0~+30~+5
Width edge trimming+20 Aiming value

In beginning and ending of recoiling,the telescope edge should not greater than 40mm;while in the middle of the coil,it should not greater than 30mm.

Coil weight shoule be between 5 to 25 tons.

Technical Requirement

Chemical composition of steel(melting analysis)should conform to standard JISG3131-1996

Mechanical Properties

Nominal thicknessYield strengthTensile strengthElongation180 degree bending test
>1.5-2.5≤290≥310≥33D=0a
>2.5-3.0≤290≥300≥35D=0a
>3.0-4.0≤290≥300≥37D=1/2a

 Note:

1 Tensile test and bending test here means for longitudinal sample

2 Tensile test adopts sample L0=50mm,b=25mm

3 Sampling method conforms to JIS Z2204 No.3 sample;test method conforms to JIS Z2248

4 Hardness test conforms to JIS Z2245

5 Aiming value of hardness is HRB 60±8.The actual value will be mentioned in guarantee,but not as acceptance requirements

Surface quality

1 Steel sheet or strip surface should be free of pollution,crack,rust and so on defect,and without spot due to line stoppage.Defect not influence forming is acceptable,such as scratch/wrinkle which cannot feel by hand touch,light yellow film after pickling,slight pits,imprint,color diffrence,etc.

2 The product with light defects is allowed due to it has no chance or cannot be cut down,but total defect parts should not longer than 6%of total length.

3 Oiling means to coating strip surface with anti-rust electrostatic oil.It can be oiled slightly,intermediate oiling and heavy oiling as required by cunstomer,Product after oiling can be stored without rust within rust within three months.

  

1.5-4.0mm*800-1380mm hot rolled pickling sheet/coil



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.